HOW TO INSTALL A CAR TRACKING DEVICE

HOW TO INSTALL A CAR TRACKING DEVICE

[icegram messages=”200″]

[icegram messages=”197″]

[icegram messages=”198″]

Car tracking devices are invaluable tools for monitoring either a single car or an entire fleet of vehicles. A real time car tracking device gives you up to the minute speed and location updates, including text or email alert based on parameters you set in advance.

For any company or person that runs a fleet of business vehicles, a tracking system will really take out the hassle associated with managing them, as well as improving efficiency and saving your money. All must note that tracking device is easier and cheaper to install than you think.

A car tracking device mainly works via GPS satellite navigation, although in some cases a radio frequency or cellular can be used if GPS coverage is poor. The actual setup is really simple, each vehicle transmits a signal to orbiting satellite computer. The vehicle information is displayed on maps, allowing you to monitor speed and exact where about.

 

There are several reasons you might want to know the exact where about and travelling conditions of your vehicle. Maybe you are keeping very tidy maintenance records and you want to be able to reference the performance history.Vehicle Tracking Device

If you live in an area where car theft is high, you might install one on one of your vehicles, so you can track it to its exact location. Far and away the most popular reason for investing in a GPS car tracking device is that you are the parent of a freshly – minded driver.

So how do you install a car tracking device?

#1. One must connect the supply line of the tracking device to the vehicle battery. Connect the ignition wire of the device to the second ignition of the car.

#2. Now place the device in such a way that is not covered by a metal surface. In many at times, the place under the dashboard is perfect. This is because, the dashboard being made of fiber does not block the signal like metal. On the board antenna or external antenna should be facing the sky.

#3: Every GPS tracking device will have its own way of being appropriately installed on a car. Those appropriate methods have to do with positioning of its power supply and the potential of being discovered. An additional reason has to do with you also want to collect car engine performance data along with the location.

#4: Depending on your objectives of installing the GPS tracking device, you may want to note all the four carefully.

  1. Are you trying to track the vehicle without the knowledge of the owner/driver?
  2. Are you trying to collect the engine performance date as well along with location of the car?
  3. Are you installing the GPS tracking device to protect the car from theft? Try to install the device so the GPS antenna is in full view of the sky and that no metal is shielding it or you won’t get proper GPS signal

You can contact Eureka Technical Services Limited for more information!

We are a security and safety limited company focused in ensuring road safety has all that you need to ensure road safety! Contact us for all your road safety needs: Speed Warning Systems, Car Alarms, Digital Speed Governor with Record and Online Tracking and Vehicle Tracking System.

Contact Us

Eureka Technical Services Limited

Email: info@eurekaafrica.com

Call: +254 2044517, +254 204445155

10 Replies to “HOW TO INSTALL A CAR TRACKING DEVICE”

  1. If you are stuck in a rut, you may find these installation tips helpful. Sometimes, installing a new GPS tracker is a matter of understanding how to take apart various vehicle items. You’ll see how simple installing a GPS tracker really is.

    1. Removing Vehicle Kick Plates: all kick plates are fastened by screws or nuts. Locating these screws and nuts will help make removal simpler. Look along the sides of a kick plate (or feel with your hand). Find the screws or nuts holding the plate in place. Remove the plate with your hands or with the proper tool.

    2. Finding the constant wires: recline your passenger side or driver’s side seat fully. Then, if possible, raise the steering wheel of your vehicle as much as possible. Behind the steering column, you will see a set of wires. These wires are called the constant wires. If you do not see any wires, look behind the place where you insert your ignition key.

    3. Stripping Wires: use the side of a sharp knife to strip plastic from wires. You do not want to cut the wires that are underneath the plastic, so make sure not to cut too deeply into the plastic coating. Once you see some exposed wires, use your fingers to remove the rest of the plastic coat. Keep in mind that you only have to remove inch of this coating in order to expose copper wire.

    4. T-Splice Tools: you can create a T-Splice with a jeweler’s screwdriver (a very small screwdriver) or with a pointed pin. Make sure not to insert a pin into the wires directly. Instead, you simply want to separate the wires in order to create a ‘T’shape.

    5. Cutting Power: it is never a good idea to install a GPS tracker while your vehicle is running. Shut off your vehicle, open your garage door, and do not install a GPS tracker near any area that has been contaminated with water.

  2. What’s taking place I’m new to this. I stumbled upon this I’ve found It absolutely useful and it has
    helped me out a lot. I’m hoping to contribute help other
    customers as it has helped me. Great job.

Leave a Reply

Your email address will not be published. Required fields are marked *